Installing the secure lockdown browser TestNav:
We recommend downloading and testing the TestNav lockdown browser at least 72 hours before administering the exam to allow time for troubleshooting if needed.
To download TestNav, please use the link below corresponding to your device type. Install package should begin downloading within seconds. When the download is finished, select the downloaded file and follow the instructions. Complete the installation as prompted.
◆ macOS, Windows, or Linux http://download.testnav.com/
◆ Windows 10 https://www.microsoft.com/en-us/p/testnav/9nd5fc7rppx1?activetab=pivot:overviewtab
Installation instructions
https://support.assessment.pearson.com/TN/set-up-testnav-on-windows20054054.html
（The above site is for Windows. MacOS and Linux can be selected from the links on the left side of the page above.
App Check：
Prior to testing, confirm the PC is configured properly. The App Check must be run on each student's testing device.
1. Launch TestNav on your PC.
2. Select App Check from the top right corner.
3. Select Run App Check (and run check).
4. When the app check completes, review the results. Green checkboxes for Kiosk Mode readiness and connectivity to TestNav display if the system passes. If one of these fails, a message indicates you must check your connection and settings before running App Check again.
Accessing the Assessment:
After the App Check is complete, go back to the top screen and scroll down to select “Student Portal.”It is located on the left, the second from the bottom.
Once you click “Student Portal,” you will be taken to the ADAM screen, where you will enter your test code.